| Driven Type: | Electric |
|---|---|
| Condition: | New |
| Certification: | ISO, CE |
| Warranty: | 12 Months |
| Appliable Wire Diameter: | 0.03~0.08mm |
| Twisting Usage: | Annealing and Tinning of Ultra-Fine Round Copper |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | Equipment model | FC-T16 | FC-T24 | FC-T32 | FC-T40 | |||||
| Twisting usage | It is mainly applied to the annealing and tinning of ultra-fine round copper wire and alloy wire | ||||||||
| Inlet wire diφ | 0.08-0.32mm or 0.15-0.64mm | ||||||||
| Stranding section area | 0.0014-0.035 | 0.0049-0.3 | 0.0137-0.45 | 0.0137-1.0 | |||||
| Max no of inlet wire | 16 | 24 | 32 | 40 | |||||
| Linear speed | Max:350m/min | ||||||||
| Pay off type | Brush pay off | ||||||||
| Pay off bobbin type | Dia300mm bobbin | ||||||||
| Annealing furnace length | Five meters or six meters | ||||||||
| Annealing type | Tube type annealing | ||||||||
| Annealing protection type | Water seal protection+nitrogen or vapor protection | ||||||||
| Tinned type | Hot dip | ||||||||
| Capstan control type | Inverter+motor control | ||||||||
| Take up control | Voltage adjusting controls torque motor take up | ||||||||
| Take up bobbin size | Five inch,eight inch or five inch,eight inch,ten inch bobbin | ||||||||
| Traverse control type | Stepless speed regulation motor+turbine gear box control toothrow traverse | ||||||||
| Dimension(mm) | 14500L*1500W*2100H | 18000L*1500W*2100H | 20000L*1500W*2100H | 24000L*2200W*2100H | |||||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}