0.04-2.52mm Core Cable Copper Wire, Tinned Wire, Twisting Bunching Buncher Making Machine

• Driven Type: Electric
• Condition: New
• Certification: ISO, CE
• Warranty: 12 Months
• Automatic Grade: Automatic
• Mould Life: >1,000,000 Shots
• Model NO.: FC-300B/400B/500B/650B/800B/1000B/1250B
• Type: High-speed Stranding Machine
• Double Twist: Core Wire
• Usage: Bare Copper Wire, Tinned Wire, Silver Jacketd Wire
• Conductor Single Wire Diameter: 0.10-0.64mm
• Conductor Stranding Section Area: 0.05-2.5mm20.05-2.5mm2
• Core Wire Single Wire Dia: 0.75-1.5mm
• Core Wire Stranding Outer Dia: 1.5-3.0mm
• Direction of Lay: Optional for Right or Left
• Tension Control Method: Mechanism Friction
• Main Motor Power: 5.5kw
• Inverter Power: 5.5kw
• Transport Package: Common
• Specification: ISO9001
• Trademark: FC
• Origin: China
• HS Code: 8479811000
• Production Capacity: 50sets/Month

Product Description

Japanese technology ,product in China
Main performance parameters of FC-650B automatic high speed bunching machine (replace of the capstan wheel to change the lay length).

1. Usage:It is applied to the stranding of bare copper wire, tinned wire, copper covered aluminum wire, lacquer wire and alloy wire and so on. 1+6 may twist instead of bunching.

2.Diameter of single copper wire: φ0.16~φ1.04mm
3.Outer diameter of wire: φ0.84~φ3.2mm;
4.Cross section area: φ0.40~φ6mm²
5.Size of take up spool: φ630mm×430mm×φ125mm(according to client's drawings to make).
6. Maximum rotating speed:2000rpm(4000twist),in normal working speed1800rpm(3600twist).
7.Type of traverse: φ30mm rolling ring traverse, winding pitch and breadth are adjustable.
8. Standard lay length: 34 section 11.6~100mm (enclose list of standard lay length).
9. Main motor: 7.5KW AC motor +frequency converter
10. Weight of copper load: about 400kg
11. Direction of strand: optional for right or left, only need to pull the reverse rod of the traverse by hands to adjust the lay-length, easy to operate.
12. Brake: electromagnetic brake for external break, automatic stop when wire reach setting meter.
13. Tension control: take up tension is controlled by magnetic powder clutch, PLC follows up and regulates tension constant tension.
14. Whole machine drive bearing:main shaft is from Sweden SKF bearing,other is adopted imported Japan NSK bearing.
15. Synchronization strap: with imported from American.
16. Spool from top to bottom: it is adopted manual hydraulic pump lifting.
17. Way of spindle lubrication: butter lubrication.
18. Index of noise: lower than 82dB
19. Dimension: 3300L×1450W×1650H(mm)
20. Weight: 4500Kg
21. Coating: Ral5015sky blue (may according to customer's requirements).
22. Package: simple waterproof packing








 

Equipment model	FC-500C			FC-650C-1		FC-650C-2split type		FC-650C-3(computer pitch)
Twisting usage	Apply for the automobile wire,power wire and so on(above seven pcs of bare copper wire,tinned wire,silver jacketed wires and enamelled wires)
Single wire diaφ(mm)	0.08-0.45		0.12-0.52			0.12-0.52			0.12-0.52
Stranding section area	0.05-1.5		0.3-2.5			0.3-2.5			0.3-4.0
Pitch(mm)	6.3-52.3		11.6-67			11.6-67			10-70
Direction of lay	Optional for right or left
Take up bobbin(mm)	Dia500	Dia630				Dia630			Dia630
Max rotating speed	3000rpm(6000TPM)	2300rpm(4600TPM)				2600rpm(5200TPM)			2600rpm(5200TPM)
Main motor power	5.5kw	11kw				11kw			15kw
Inverter power	5.5kw	11kw				11kw			15kw
Tension control method	Magnetic powder clutch+PLC+touchscreen,ensure the constant tension from empty to full bobbin
Protection	1.wire inside and outside is broken,automatically brake/stop 2.The preset length is arrived
Brake mode	Electromagnetic brake
Main bearing lubrication type	Grease lubrication,automatic refueling device,programmed automatic timing refueling time,without manual adding oil,avoid operator did not add regularly cause damage to the spindle bearings.
Pressure sensor	On line check the take up tension then revert back and rectify the tension figure
Internet control	Can sums up the information of machine to one computer or mobile,check the working condition at any time,such as:rotating speed,twist specification,output and so on.To realize the far distance monitor and maintenance,aims to high precision management,lower the production and maintenance cost.
Operation mode	Touchscreen operation
Dimension(mm)	2680L*1250W*1500H				3300L*1550W*1900H		3600L*2000W*2100H			3600L*2000W*2000H